Click to enlarge

Temperature Humidity Sensor

SPD-HT485-A is an industrial grade temperature and humidity transmitter used for measuring indoor temperature and humidity, with the advances of intuitive display, high precision, low power consumption and easy installation.

With RS485 interface and standard Modbus protocol, it’s easy to be integrated to other remote monitoring system.

Categories: ,
Description

1. Large display with visible value: it’s convenient for user to check the real time value from temperature humidity sensor quickly.

2. Low power consumption less than 0.05W.

3. Support Modbus-RTU protocol: it can be integrated in remote environmental monitoring system.

4. ID and baud rate can be set from device, which is convenient for user setting when installation.

Related products

2 Pins Non-location Water Leak Sensing Cable

SPD-WL1100 2 pins non-location water leak sensing cable has high detection sensitivity, fast and reliable response. It is suitable for alarm detection in various places with water leakage risks. It can be connected to most water leakage alarm controller.

AC 220V Power Failure Detector

SP220 is used to detect 220V AC voltage failure or not. It is installed in the power supply and distribution box or at the output end of the UPS to detect whether the current monitoring equipment has normal power. When the sensor detects a power failure in the power grid, it will output a normally open and normally closed switching signal to implement a power outage alarm function.

Battery Monitoring Host

SPD-A3-CBAH01-B11 is suitable for online battery monitoring, supporting up to 4 groups and up to 200 batteries.

Door Contact Sensor

SPD-DC is a wired sensor that accurately senses door opening and closing status, with optional normally closed and normally open outputs.

Dry Contact Smoke Detector

SM30 is a photoelectric smoke detector with NO/NC output, which operates according to the principle of sensing smoke particles. Adopting unique structural design and photoelectric signal processing technology, it has the functions with dust, insect, anti-external light interference and others, which ensures the stability of the product. This product has a good detection to visible smoke produced by slow vulva or bright combustion. It’s widely used in indoor environments such as residential, shopping malls, hotels and warehouses.

RJ45 Temperature and Humidity Sensor

SPD-HT485-RJ is an industrial grade temperature and humidity transmitter used for measuring indoor temperature and humidity, with the advances of intuitive display, high precision, low power consumption and easy installation. It has two groups RJ45 ports, easy cabling for power supply and communication. With RS485 interface and standard Modbus protocol, it’s easy to be integrated to other remote monitoring system.